Connecting The Unit To A Pc - Sharp WA-MP100H Operation Manual

Connecting the unit to a PC

WA-MP100H
WA-MP110H
ENGLISH
Connect the unit to a PC to transfer audio data.
L I N
E I
N
PC
To the USB port
E-13
WA-MP100_110H TINSZA068SJZZ
1
Open the USB port cover.
2
Connect the unit to a PC with
the USB cable.
Whilst the unit is connected to the
PC, the message shown on the
right appears on the unit.
MIC
Caution:
" Do not disconnect the USB cable whilst transferring
NAVI
audio data from a PC. Audio data on the unit may
become corrupted.
" Operation is not guaranteed if the PC is connected to
two or more USB devices.
" Connect the USB cable to the PC's USB port. If con-
nected via a USB hub, operation cannot be guaran-
teed.
" We do not guarantee operation of the unit with self-
built PCs or PCs with modified motherboards.
" Make sure to use the supplied USB cable. Use of
other cables (two-way cables, extension cables, etc.)
degrades the quality of connection and may cause a
malfunction.
Notes:
USB cable
" The buttons on the unit do not work if it is connected to
a PC. Disconnect the PC to operate on the unit (see
page 21).
" You can connect the unit to a PC with the supplied
USB adaptor.
05/5/27
FS
READY
MIC
NAVI
WA-MP100_110H_SEEG_E.fm