Table of Contents
Advertisement
Recording with the built-in microphone
WA-MP100H
WA-MP110H
ENGLISH
Check the memory status beforehand (see page 44). If
the memory is low, move some data to a PC to make
some room.
MIC
NAVI
Note:
This microphone is monaural and omni-directional. How-
ever, it is recommended to direct it toward the source for
better recording.
1
Press the POWER button to turn the power on
(see page 10).
POWER
2
Hold down the menu button for 0.5 seconds or more.
Hold down the menu button for 0.5 seconds or more
to return to the play mode.
3
Within 10 seconds, move the menu button toward
or
to select "RECORD", and press it.
E-35
WA-MP100_110H TINSZA068SJZZ
4
Within 10 seconds, move the menu button toward
+ or - to select "RECORD MIC", and press it.
MIC
" Recording will be started.
" If the memory is low, "Disk Is
Full! Can Not Record" ap-
pears (recording is not possi-
ble).
To interrupt recording:
Press the menu button.
To resume recording, press the menu button again.
To stop recording:
Press the
button.
Data will be saved.
Note:
Data recorded with the unit are named automatically as
follows.
SOUND
FM radio recordings: F001.mp3, F002.mp3...F999.mp3
Line-in recordings: L001.mp3, L002.mp3...L999.mp3
Microphone recordings: M001.mp3, M002.mp3...M999.mp3
(Maximum number: 999)
Newly saved files are numbered sequentially following
the largest number among the existing file names. It is
recommended to delete or move files from one with the
largest number. To transfer data to a PC, see "To use as a
USB storage device" on page 45.
RECORD
05/5/27
RECORD
RECORD MIC
RECORD LINE-IN
00:00:01
01:23:45
File name3
Recording...
Remaining recording time
WA-MP100_110H_SEEG_E.fm
Advertisement
Table of Contents
