Sharp WA-MP40W Operation Manual page 20

Playing transferred audio data (continued)
WA-MP40(W)/(BK)
WA-MP400(W)/(BK)
■ Equaliser setting
ENGLISH
1
Hold down the MENU button for 1 seconds or more.
2
Press or
button.
3
Within 40 seconds, press
and press MENU button.
4
Within 20 seconds, press
equaliser setting and press MENU button.
Normal : The sound is not modified
Rock:
Pop:
Jazz:
Custom:
● The setting is completed.
● The main menu screen returns after 40 seconds or select "Exit"
and press MENU button.
Note:
Distortion may occur depending on the equaliser settings. In this
case, change the type or turn down the volume.
E-18
MUSIC
button to select "SETUP" and press MENU
S e t t i n g s
PlayMode
E q
D i s p l a y
P o w e r
R e c o r d S e t t i n g s
or button to select "Eq"
Settings Eq
P l a y m o d e
Normal
E q
Rock
D i s p l a y
Pop
P o w e r
Jazz
R e c o r d S e t t i n g s
Custom
or button to select an
For rock music
For pop music
For jazz
Sound quality can be customised
■ Customising sound quality
1
Perform step 1 - 3 on page 18.
2
Within 20 seconds, press
button to select "Custom" and press
MENU button.
3
Within 20 seconds, press
button to select the frequency and
press button.
80Hz : Bass setting
250Hz: C C C C
1000Hz: Midrange setting
4000Hz: B B B B
12000Hz: Treble setting
4
Within 20 seconds, press VOL + or –
button to increase or decrease the
gain level.
5
Repeat steps 3 and 4 to adjust each frequency.
6
Within 20 seconds, press MENU button.
● The setting is completed.
● The settings screen returns after 20 seconds or press MENU
button.
Note:
The "Custom" settings will remain in the memory even after you
switch to another equaliser mode.
or
Eq
Normal
Rock
Pop
Jazz
Custom
or
Custom
dB 0.0 1000Hz
Custom
dB - 6.5 1000Hz