Battery Replacement - Sharp WA-MP40W Operation Manual

Notes:
● Charge the battery within the range of 10°C - 30°C (50°F - 86°F).
● The unit may get warm during or after charging. This is normal.
● When charging battery for the first time or after a long period of
disuse, battery life may be shorter. Repeat charge/discharge
cycle 4 to 5 times to restore the full capacity.
● After charging, unplug the USB cable. (Refer page 6)
■ Built-in battery
● The built-in battery may discharge completely when this product
is left unused for long periods. Recharge the battery before use.
● Charging time depends on the battery condition and ambient
temperature.
● At low temperatures, continuous playing time is shortened.
● SHARP shall not be liable for any damages resulting from loss or
alteration of audio data caused by malfunction, repairs, or
complete discharge of the battery.
■ Checking the remaining amount of battery level
The battery level is shown by the battery indicator during operation.
03
When the battery
level is high

■ Battery replacement

This product has a built-in battery.
● The battery is rechargeable up to approximately 300 times.
● The battery life and the operating time may be shortened by usage
conditions, long periods of disuse, etc.
● The battery is a consumable item. If it does not charge or the
operating time is noticeably shorter than normal, replace with a
new battery.
● Replacement should be carried out by qualified personnel
only. Contact your dealer or local SHARP service facility.
Never disassemble this product for this purpose.
Caution:
Pay attention to the environment when disposing of this product (the
built-in battery should be handled separately). See page 32.
Battery indicator
When the battery
level is very low
WA-MP40(W)/(BK)
WA-MP400(W)/(BK)
ENGLISH
E-7