Installing The Vertical Stand; Player Setup Location - Sharp BD-HP90RU Operation Manual

Player setup location

This player can be used in a horizontal or vertical
position depending on the installation location.
E
Using the player in a horizontal position
Remote control sensor "Front"
E
Using the player in a vertical position
Remote control
sensor "Top"
Remote control
sensor "Front"
Switch the remote control sensor to "Front" or "Top"
depending on the installation location.
FRONT
TOP

Installing the vertical stand

When using the player in a vertical position, install the
supplied stand.
1
Match the screw hole of the player and the
stand.
Screw hole
18
Selector switch for
Remote control sensor
The screw is attached
on the stand.
2
Secure the stand to the player.
3
Bundle the cables.
Securing the player to a TV stand, etc.
To prevent the player from falling, the stand can be
secured to a TV stand, etc.
Using a screw (commercially available), attach the screw
to the hole of the stand to secure the player.
Pass the cables
through the stand.
Screw (diameter:
approx. 3 mm)
TV stand, etc.