Before Starting Playback
Connecting the AC adapter
1
Plug the AC adapter cord in to the DC IN
terminal on the rear of the Player.
2
Plug the supplied AC cord into the AC adapter.
3
Then, plug into an AC outlet.
AC adapter
AC cord
NOTE
•
Place the Player close to the AC outlet, and keep the
power plug within reach.
•
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH THE UN-INSULATED PARTS OF ANY CABLES
WHILE THE AC CORD IS CONNECTED.
•
The AC adapter may become warm after long-time use.
This is normal and does not indicate malfunction.
•
If you are not going to use this Player for a long period of
time, be sure to remove the AC cord from the AC outlet.
Turning the Power On
BD/DVD/CD mode indicator
POWER B
B (On/Standby) indicator
AQUOS PURE MODE indicator
3D indicator
Turning the power on
Press B on the remote control or on the Player to
turn on the power of the Player.
The B (On/Standby) indicator lights green.
•
NOTE
•
When the language setting screen is displayed, set the
appropriate language.
•
Normally, the player's language will be automatically set
according to the TV language setting by obtaining the TV
information through the HDMI control signal.
Entering standby
Press B on the remote control or on the Player to
enter standby.
The B (On/Standby) indicator lights red.
•
If you press B again immediately after entering standby,
•
the Player may not turn on. If this happens, wait for 10
seconds or more and then turn on the power again.
Indicators on the Player
B (On/Standby) indicator
Green on
Red on
AQUOS PURE MODE indicator
Green on
BD/DVD/CD mode indicator
Blue on
Blue blinks
3D indicator
Green on
Power on
Standby
Output in AQUOS PURE
MODE (See page 25.)
Playing back
Loading a disc/updating
Video signal output is 3D
images (See page 25).
23