Table of Contents
Advertisement
Installation
Instructions
WINDOW
INSTALLATION--OPTIONAL
(cont.)
141PREPARE WINDOW
[_ Hark the centerline of the stool. Heasure from the
[_
Heasure 12_" from the centerline on both sides
centerline 13_" on both sides for the panel cuts.
for the sill support brackets.
Centerline
_1
Sill
/£
_
Outside
,/
,'_13_"
_13_"
_,
Inside
Stool
Stool
Sill
Centerline
Inside
[] INSTALL SILL SUPPORTS
[_ Assemble the sill supports. Do not fully tighten
the spacer mounting screws at this time.
Spacer m ounting
screwsType (A)
Spacer
Loci< n ut-------_
Adjusting bolt--------_
Large washer-------_ _(_
(forusewithwood sills)
t
r_ Turn the bolts and tighten the lock nuts to make
the sill supports level or tilt down 1/8" to the outside.
Line up the "V" notch with 123A '' marks. Drill pilot holes
and attach the sill supports.
Average sill
Sillsupport
_iT
--
Spacer
Narrowsill
Offsetsill(suchasbrickor stone)
FB1 Before attaching the sill supports, place them on
the window stool. Select the spacer position that
will place the spacer near the outermost point
on the sill. Tighten the spacer mounting screws.
S0rewsarenpos
Outside
NOTES:
,, On narrow sills, there may not be enough room to use
the lock nut.
,,A deep offset sill may require a longer adjusting bolt
than the standard hex-head bolt provided.
,, On wood sills use the large washer between the bolt
head and the sill. This prevents the bolt from digging
into the wood.
18
Advertisement
Table of Contents
