Advertisement
Available languages
Available languages
6.Coiltheexcess watersupply linebehind refrigerator, asshown in
fig.# 12andarrange thecoils sothey do notvibrate orwearagainst
other s urfaces.
7.Turn ONthewatersupply attheshutoff valve andtighten any
connections thatleak.
8. Reconnect
the refrigerator
to the power supply.
9. To turn the icemaker
ON, lower the auto shut-off arm.
Important:
It takes approximately
24 hours for the ice maker to produce
ice. New plumbing
may cause ice discoloration
and poor
flavor.
Discard ice made in the first 24 hours.
Automatic
Maker
Tips
Remember
that the water quality determines
your ice quality.
Do not
connect the ice maker to water that is softened.
Chemicals from a
malfunctioning
softener can damage
the icemaker.
To stop the ice maker,
lift the wire arm until it clicks and locks in the OFF
(raised) position.
The ice maker turns OFF automatically
when the ice
container
is full. If your model has an adjustable
freezer shelf, place the
shelf so that when the ice container
is full, the
ice will hit the wire signal arm.
Ice Maker Tips:
• Ice stored too long may develop an odd
flavor. Empty the container
and make sure
the wire arm is in its ON (lowered)
position. The ice maker will then produce
ice.
• Keep the wire arm in OFF position
until the
refrigerator
is connected
to the water supply or whenever
the water
supply is turned OFF.
• The following
sounds are normal when the ice maker is operating.
• Running motor
• Ice dropping
into ice container
• Running water
• Water valve opening
or closing
CAUTION:
• Do Not wash the ice container
in your dishwasher.
• Stop the ice maker when cleaning
the freezer or when leaving for short
vacations.
• If the ice maker has to be turned OFF for a long period
of time,
turn the water supply valve to the closed position.
10
Advertisement
