Preset For Use - Hitachi 13VR7B Owner's Manual

PRESET FOR USE
For the first time you may want to select language (Eng-
lish or Espafio!=Spanish) and preset the tuner to scan
only the channels you receive in your area. You must
use the remote control for the following steps.
NOTE: Channel memory programming is not needed
when using a converter/descrambler box.
1
Connect the TViVCR power cord
Plug the TV/VCR power cord into a stand- ,i
ard AC outlet. ,,,zzj
t
2
Turn on the TV/VCR
Press POWER button to turn on the TV/VCR.
3
Select "ENGLISH" or "ESPAI<IOL"
Select "ENGLISH" or
"ESPANOL=Spanish" using
CHANNEL • or • button or
SELECT button. "[ ]" marks in-
dicate the selected language.
/- SET uP
b LANGUAGE
IENGLISHI ESpANOt
_UTO PRESET
J
4 Begin auto preset
setup
LANGUAGE
[ENGLISH] ESPANOL
AUTO PRESET
Press MENU button to point to
"AUTO PRESET".
Then press SELECT button.
The tuner scans and memorizes -- _
all the aclive channels in your area.
NOTES:
• The TV/VCR distinguishes between standard TV
channels and CATV automatically.
• If you want to play or record a video tape BEFORE
presetting the tuner, you must press MENU button.
To preset the tuner again, see "AUTO PRESET
AGAIN".
5 After scanning
The tuner stops on the lowest memorized channel.
(TV mode: from CH 02/CATV mode: from CH 01 )
If you want to recall the selected channels, you can se-
lect the desired channel directly with the remote control
number button or CHANNEL • or 'I'.
TO RETURN TO TV MODE I$'ttl'2N
S CA NNING
The channels you ao longer recei ,'e or seldom watch cart
be deleted from the memory. (Of course, you can add
the deleted channel into the memory again.)
1 Select "CHANNEL SET UP"
Press MENU bulton repeatcdl:r ,...............
r"CTU_E CONTnO_
to point to "CHANNEL SET ............
CHANNFL SE'UP
UIT TI)" USEOS S_T LI#
tANGUa, GF [ZNG[ S_
(:AplION tO[F]
J
TIME ,_EAr_GH
Then, press SELECT button.
'............
Press MENU button repeatedly
to point to "ADDzDELETE CH".
Press SELECT button.
2
Select "ADD/DELETE CH"
ALTVjT:t]::: r IF,r, [_
3 Enter the desired channel number
Press CHANNEl. • or • bLtton ............
repeatedly or nmnber buttons on ..... ,,
the remote control until you:: de-
sired channel number appears.
(You can also use the rurnber .......
buttons to enter it) (Example
CH8)
4 Delete (or add) it from (into) memory
Press ADD/DELETE button. The channel number
changes to light red. The channel is deleted from men>
ory.
• To delete another channel, repeat steps [3] and 141.
• If you press the ADI)/I)EI_ETE button again, the
channel is memorized again.
Added channel is in light blue.
! Deleted channel is in light red.
]
5 Exit the channel setup mode
Press MENU button to retLrn no TV mode.
NOTE: To confirm that chant el(s) has been deleted or
added, press CHANNEL iI, or • button.
Press MENU button in scanning mode.
-12- EN
6E2_