Preset For Use; Preset For The First Time; To Return To Tv Mode When Scanning - Hitachi 19VR11B Owner's Manual

PRESET FOR USE

PRESET FOR USE
The first time you may want to select language (English or Espanol=Spanish) and
preset the tuner to scan only the channels you receive in your area. You must use the
remote control for the following steps.
NOTE: Channel memory programming is not needed when using a
converter/descrambler box.

PRESET FOR THE FIRST TIME

1 Connect the TV/VCR power cord
Plug the TV/VCR power cord into a standard AC outlet.
2 Turn on the TV/VCR
Press the POWER button to turn on the TV/VCR.
3 Select "ENGLISH" or "ESPANOL"
Select "ENGLISH" or "ESPANOL=Spanish" using CH
button. "[ ]" marks indicate the selected language.
4 Begin auto preset
Press MENU button to point to "AUTO PRESET"
Then press SELECT button. The tuner scans and memorizes in the active channels in
your area.
NOTES:
• The TV/VCR distinguishes between standard TV channels and CATV automatically.
• If you want to play or record a video tape BEFORE presetting the tuner, you must press
MENU button. To preset the tuner again, see "AUTO PRESET AGAIN".
5 After scanning
The tuner stops on the lowest memorized channel. (TV mode: from CH 02/ CATV
mode: from CH 01) You may want to recall the selected channels, you can select the
desired channel directly with the remote control number button or CH

TO RETURN TO TV MODE WHEN SCANNING

Press MENU button in scanning mode.
or button or SELECT
or .
21