To Cancel The Daylight-Saving Time; Setting The Clock (Auto/Manual); Auto Clock Setting - Hitachi 19VR11B Owner's Manual

PRESET FOR USE
programmed recording starts between 2:00AM - 2:59AM on this day, the TV/VCR
will start recording at 3:00AM.
• Last Sunday of October: From 1:00AM to 2:00AM When programmed recording
ends between 1:00AM - 1:59AM on this day, the TV/VCR will stop at 2:00AM.
Make sure...
• Press POWER button to turn on the TV/VCR.
• You must use the remote control for the following steps.
1 Select "SETTING CLOCK"
Press MENU button repeatedly to point to "SETTING CLOCK".
Then, press SELECT button.
2 Set "D.S.T." (Daylight Saving Time) to [ON]
Press MENU button repeatedly to point to "D.S.T."
3 Set "D.S.T." (Daylight Saving Time) to [ON]
Press CH or button repeatedly until [ON] appears.
4 Exit the Daylight-Saving Time mode
Press MENU button repeatedly until the TV/VCR return to the TV mode.

TO CANCEL THE DAYLIGHT-SAVING TIME

Repeat steps [1] to [3]. Then, press CH or button until [OFF] appears and press
MENU button to return to TV mode.

SETTING THE CLOCK (AUTO/MANUAL)

Set the clock accurately for proper automatic timer recording. If the Public
Broadcasting Station (PBS) is available in your area, follow "AUTO CLOCK
SETTING". If it is not, follow "MANUAL CLOCK SETTING".

AUTO CLOCK SETTING

You can have the TV/VCR set the clock automatically by using the Public
Broadcasting Station (PBS) channel in your area. Once you have set the clock by
using the following procedure, the TV/VCR will automatically monitor the correct
time and date being broadcast by the PBS station in your area, using a new service
called Extended Data Service (XDS).
Make sure...
• Press POWER button to turn on the TV/VCR to set the Auto Clock to ON.
• Confirm that the antenna connections are correct.
• The cable converter box must be turned on if your TV/VCR is connected directly to
it. (See NOTES:)
• You must use the remote control for the following steps.
24