Normal Playback - Hitachi 19VR11B Owner's Manual

NORMAL PLAYBACK

NORMAL PLAYBACK
Make sure...
• Power must be turned on.
1 Insert a prerecorded tape
If the erase-protection tab has been removed, the TV/VCR will start playback
automatically
2 To begin playback
Press PLAY button.
3 To stop playback
Press STOP button when playback is completed.
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically (Digital Tracking function-DTR)
when you start playback.
NOTE: The following function is controlled only by the buttons on the VCR.
• When playing pre-recorded tapes or tapes recorded on units other than your own,
noise lines (black and white streaks) may appear on the playback picture. If this
occurs, you can adjust the tracking control manually by pressing CH
until the streaks disappear. To return to the DTR function, stop the tape once and start
playback again.
• You can reduce the noise lines by pressing CH
Slow tracking adjustment will not be set automatically.
Note: In Still mode, press SLOW button and press CH
disappear. To return to Still mode, press PAUSE/STILL button again.
or
or button in slow mode, too.
or button until the streaks
button
34