Table of Contents
Advertisement
NORMAL
PLAYBACK
Make sure ...
• TV/VCR power must be turned on.
1 Insert a prerecorded
tape
If the erase-protection
tab has been
removed,
the
TV/VCR
will start playback
automatically.
2
To begin
playback
I "_*_"
/
Press the PLAY button.
I
L
Tc stop playbac!<
Press the STOP button
when
playback is completed.
PICTURE
SEARCH
This feature is very useful in finding or skipping over a
particular scene on a tape. In this mode, the sound will
be muted.
1) You may view a video tape at a high speed in either
a forward or reverse direction by pressing the F.FWD
or REW button. (in the SP / LP / SLP modes)
2) Press it again and the TV/VCR will now search in
super high speed. (in the LP / SLP modes only)
NOTE:Tapes
recorded in the SP or LP mode will
display a noise bar on the TV screen and the
picture may revert to Black and White. This
is normal.
3) Press the PLAY button to return to normal speed.
STILL
PICTURE
You can view a still picture on the screen during play-
back (the Still mode). Press tile PAUSE/STILL button
during playback.
Press the PLAY button to return to playback.
NOTE:
If it is left in the Pause mode for more than five
minutes,
the TV/VCR
will automatically
switch to the Stop mode.
I SLOW MOTION
Press; SLOW button to reduce the playback speed. The
VCR mutes the sound during slow motion. You can con-
trol the speed by pressing the EFWD button (faster) or
the REW button (slower).
Press the PLAY burto3 to return to normal playback.
NOTE: If it is left in the Slow mode for more than five
minutes,
the TV/VCR
will automatically
switch to lhe Stop mode.
TRACKING
ADJUSTMENT
]
• Tracking
adjustment
will be set automatically
(I)igi-
tal Tracking
function)
when you ,,;tart playback.
• When playing
pre-recorded
tapes, or_tapes recorded
<_',:_ units other tkan your owm noise lines (black and
white streaks) may appear on the playback picture. If
this occurs, you ,:an adjust the tracking control manu-
ally by pressit_g the CHANNEL
,ik or • button until
_he streaks disappt:ar.
To return to the DTR function,
stop the tape once and
start playback
aga n.
• You can reduce
the noise
lines
by pressing
the
CHANNEL
• or • button
in slow mode, too. Slow
tracking adjustment
will not be set automatically.
NOTE:
In Still mode, press the SLOW button
and
press the CHANNEL
• or • button
until
the streaks
disappear.
To return
to Still
mode,
press
the PAUSE/STILL
button
again.
-19-
Advertisement
Table of Contents
