To Cancel Vcr Plus+ Timer Recording; Checking Start/End Time Of Automatic Timer And Vcr Plus+ Timer Recordings - Hitachi 19VR11B Owner's Manual

TIMER
Press CH
line. Press SELECT button.
For weekly recording: To record the TV program every week.
Press CH
week appears together. Press SELECT button.
NOTE: To confirm or change the VCR plus+ code, press VCR PLUS+ button. You can
return to step [2].
4 Set the tape speed
Press CH (up) button until your desired tape speed appears. (Example: LP)
• You cannot use the TAPE SPEED button.
5 Exit the VCR plus+ mode
Press MENU or SELECT button.
To set another program, repeat steps [1] to [5].
6 Set the timer
Press POWER button to set VCR plus+ timer recording. The REC indicator lights up.
• You must turn off the TV/VCR to activate VCR plus+ timer recording.
If power is not turned off and you continue watching TV, "TIMER REC STANDBY"
starts flashing on the TV screen 2 minutes before the programmed start time.

TO CANCEL VCR PLUS+ TIMER RECORDING

• While setting a program; press MENU button to return to the TV mode.
• After setting a program;
1) Press POWER button.
2) Press MENU button to point to "TIMER PROGRAMMING".
3) Press CH
4) Press ADD/DELETE button.
5) Press MENU button to return to the TV mode.
• While recording is in progress;
1) Press POWER button.
2) Press STOP/EJECT button on the TV/VCR.
If you press POWER button to turn off before the end time, timer recording will continued.
Refer to "After setting a program;" above to cancel it.
CHECKING START/END TIME OF AUTOMATIC TIMER AND
VCR PLUS+ TIMER RECORDINGS
(down) button repeatedly until "EVERY DAY" appears on the "DATE"
(down) button repeatedly until "EVERY" and your desired day of the
or button repeatedly until your desired program number appears.
52