Using The Instant Recording Timer (Irt) - Hitachi 20VR4B Operating Manual

RECORDING A PROGRAM
not leave an index mark.)
During timed recordings, the TV/VCR Combination automatically inserts an
index mark at the beginning of the recording.

Using the Instant Recording Timer (IRT)

The Instant Recording Timer (REC/IRT button on the TV/VCR Combination)
will let you make a simplified timer recording without having to use the
programming timer. In order to set the IRT properly the clock must be set before
starting.
1) Select channel you want to record, or select LINE by AVX button in order to
record external video input.
2) Select tape speed by "TAPE SPEED" button on remote control.
3) Press record button to start recording.
4) Press REC/IRT button during normal recording and press REC/IRT button
again while large "REC" is displayed. Then Recording time length will be set 30
minutes.
Each time you press REC/IRT button is set as below.
• To stop the recording during IRT, keep pushing "STOP/EJECT BUTTON" of
set more than 3 seconds.
• IRT remains on, even if you turn off monitor. The power of VCR is turned off
after recording is finished.
• To confirm the time of IRT, by "STOP" button of remote control. IRT remains
on IRT continues even if the stop button on the remote control is pressed.
36