Closed Caption System; To Set The Closed Caption Mode; Recording And Playing Back A Closed Caption/Text Program; Selecting The Proper Mode - Hitachi 20VR4B Operating Manual

CLOSED CAPTION SYSTEM

CLOSED CAPTION SYSTEM
This feature not only makes it possible for the hearing-impaired to enjoy selected
programs, but can also be used to receive valuable information from your TV
stations.
Remote Control Buttons

To Set the Closed Caption Mode

1. Press the MENU button.
The menu will appear as an on Screen Display.
2. Press the 1 key on the remote control.
The Set up screen will appear.
3. Press the 1 key on the remote control.
The CLOSED CAPTION screen will appear.
4. Press the 1, 2 or 3 key to change the display to the desired mode.

Recording and Playing Back a Closed Caption/Text Program

Your TV/VCR Combination will automatically record the Closed Caption/Text
signal of applicable programs. To see the Closed Caption narration or text during
playback, simply follow the steps above.
• When selecting prerecorded tapes for rental or purchase, look for the CC (closed
caption) mark.

Selecting the Proper Mode

DISPLAY: ON
When this mode is selected, a narration of selected TV programs will be displayed
on the screen. Check your TV programs listings for CC (closed caption)
broadcasts.
DISPLAY: OFF
In this mode, narration will not appear on the screen even if a closed caption
broadcast is received.
TEXT
In this mode, black space will appear on the screen. Then, when the TV station
broadcasts text such as program listings, special information, etc., it will appear in
this space. This text block will remain on the screen until your remove it by
changing the display in step 4.
CHANNEL: 1 2
The closed caption signal may be broadcast over one or both of these channels.
Note:
• This television receiver provides display of television closed captioning in
accordance with 15.119 of the FCC rules.
20