Vcr Mode; Movie Return; Auto Repeat - Hitachi 20VR4B Operating Manual

VCR MODE

VCR MODE

Movie Return

If your videocassette has the safety tab removed and you set the MOVIE function
to ON during setup, the VCR will stop and automatically rewind the videocassette
and eject it, when it reaches the end of the tape or a blank section of tape which
lasts for more than 30 seconds.
This function works only in PLAYBACK mode, not in RECORDING mode.

AUTO REPEAT

If you set the AUTO REPEAT function to ON during setup, playback will
continued to the end of the recorded section of the tape. The tape will then auto
rewind to the beginning of the tape and will repeat playback.
1) Press the MENU button.
2) Select "SET UP" by press the "1" key.
3) Select "VCR MODE" by press "5" key.
4) Press "1" or "2" button, and set the VCR MODE as you prefer.
NOTE:
For the protection of tape and head do not play "AUTO REPEAT" for an extended
period of time.
31