Settingthe Clock And Minute Timer - Frigidaire FEB789ECCE Owner's Manual

Setting the Clock
and Minute Timer
To Set the Clock
You must set the clock when the oven is first plugged in or each time the power
supply to the oven has been disconnected or interrupted. The clock must always be
set to the correct time of day, as the automatic start and stop time operations (used
to set the timed bake and self-clean modes) work directly with the clock.
1. The display window will flash "12:00." The oven control may lock and then
unlock the oven door. The word "Lock" will glow in the display. The locking
and unlocking of the door takes about one minute. This is a normal part of the
initial start-up and does not mean that the oven will begin a self-clean cycle.
2. Push the CLOCK pad. The display window will stop flashing and the word
"Time" will glow in the display for a few seconds.
3. Push the Increase (A) or Decrease (V) pad until the correct time of day
appears in the display.
To change the time, follow instructions 2 & 3 above.
To Set the Minute Timer
The minute timer does not start or stop cooking. It serves as an extra timer in the
kitchen that will beep when the set time has run out. The minute timer can be used
independently during any of the oven functions and can be set for any amount
of time from 1 second to 9 hours and 50 minutes. The minute timer is not active
during the self-clean function.
1. Push the TIMER ON/OFF pad. ":00" and the word "Timer" will glow in the
display.
2. Push the Increase ( A ) or Decrease ( V ) pad until the desired time appears
in the display. As soon asthe set pads are released, the time will begin to count
down in the display and the word "Timer" will continue to glow.
3. When the set time has run out, the timer will beep 3 times. The timer will then
continue to beep once every 10 seconds for 5 minutes or until the TIMER ON/
OFF pad is pushed.
When setting the minute timer for: The time will appear in the display
and increase in:
5 seconds to 2 minutes 5 second increments
2 minutes to 10 minutes 10 second increments
10 minutes to 1 hour 1 minute increments
1 hour to 9 hours and 50 minutes 5 minute increments
To change the minute timer while it is in use, push the Increase ( A ) or Decrease
( _' ) pad to increase or decrease the time.
To stop the minute timer, push the TIMER ON/OFF pad. The word "Timer" will
disappear from the display a few seconds later. Or, push the Decrease ( V ) pad
until "00" appears in the display.