KitchenAid KECC501G Use And Care Manual page 9

• Your Cooktop
his section tells you how to operate the controls on the cooktop. It also discusses how the
eramic glass cooktop works, and includes tips on how to cook with and maintain the cooktop.
To choose a power level other than HI, from
the HI setting, touch and hold, or tap, the
arrow pointing to HI and the power level will
decrease. Stop when you reach the desired
level. Follow the same procedure from LO to
increase the power level.
To turn heating elements off individually,
touch ON/OFE To turn all elements off at
once, touch ALL OFE
Fire Hazard
Turn off all controls when done
cooking.
Failure to do so can result in death
or fire.
Surface unit
........ Control
.................. knob
iiii!i!iiiiiii,_
Control knobs
(Models KECC50 IG,
(ECC502G, YKECC502G, KECC507G,
/KECC507G, KECC562G, KECC567G,
(KECC567G, KECC051H, KECC507H,
(ECC563H, KECC567H)
_ush in control knobs before turning them to
setting. Set them anywhere between HI and
_)FE
.:lectronic touch controls (Models
(ECC508G, YKECC508G, KECC568G,
(KECC568G)
touch ON/OFF to turn heating elements on.
I-heLO and HI lights will blink on and off,
ndicating a choice of high or low power. To
-hoose high power, touch the arrow pointing to
-I1.To choose low power, touch the arrow
NOTE: Heating elements will be visible (glow)
only at or above power levels 7 or 8.
To lock controls, touch CONTROL LOCK
and hold for 5 seconds. A tone will sound and
the lock light will go on. To unlock, repeat
above and lock light will go off.
Models KECC508G, YKECC508G,
KECC568G and YKECC568G are equipped
with a control cooling fan. The fan operates
when the cooktop is in use. The fan may
continue to run for a short period of time after
the cooktop is turned off.
Surface unit markers (All Models)
The shape and location of the Surface Unit
Markers match the shape and location of
the surface units that the control knob or
the touch control operates.
Power on light
Models KECC501G, KECC502G,
YKECC502G, KECC507G, YKECC507G,
KECC562G, KECC567G, YKECC567G,
KECC051H, KECC507H, KECC563H,
KECC567H :These models have a separate
Power On Light.
Models KECCS08G, YKECCS08G,
KECCS68G, YKECCS68G: These
electronic touch control models have a
common Power On Light. Power levels
LO through HI also act as Power On
Indicator Lights.