Changing The Signal Type - GE VG2050 User Manual

4,
AUTO CHANNEL SEARCH
What type of signal
are you using?
1 Cable TV
2
Antenna
3>Detect Automatically
0 Cancel
Select one of the three AUTO CHANNEL SEARCH options
(the current choice is highlighted with the arrowhead at left):
Cable TV searches for cable stations from a single channel
Antenna searches for local broadcast stations on all channels
Detect Automatically will attempt to determine if the
signal comes from one or many channels.
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for available channels--this can take up
to one or two minutes. When the scan is complete, the VCR tunes
to the lowest numbered channel. Pressing the CHAN up or down
buttons on the remote will only scroll through active channels.
Changing the Signal Type
If cable service is ever added or Bmoved, the VCR_ signal may
have to be adjusted. To choose between cable and standad
antenna signals:
1. Press the MENU button on the remote control to display the
VCR MAIN MENU.
2. Press 3 to display the CHANNELS menu.
Detect automatically
A strong cable or antenna signal in
your area may cause Auto Detect to
mis-detect. If this should happen,
select 1 or 2 for the system you have.
,
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 Cable Box Setup
0
Exit
Press 3 to change the Signal Type between CABLE and
ANTENNA
Selecting Channels
The Channel up and down buttons
access those channels active in your
VCR channel list.
You can still access channels not in
the channel list by using the number
buttons on the remote.
11