LG 20LH1DC1 - 20.1IN LCD HOSPITAL GRADE PRO-IDIUM ATSC/NTSC/QAM Operation Manual page 68

Operation guide
Hide thumbs Also See for 20LH1DC1 - 20.1IN LCD HOSPITAL GRADE PRO-IDIUM ATSC/NTSC/QAM:
Table of Contents

Advertisement

APPENDIX
CLONING PROCEDURETROUBLESHOOTING
IMPORTANT
INSTALLER SETUP INFORMATION!
PLEASE READ THE FOLLOWING...
Warning: Do not use LT2002 while a
LodgeNet PPV card is installed in TV or clone
programmer will be damaged.
Reset Clone After Static Shock
After replacing exhausted batteries, or if the programmer
behaves strangely
after a static shock, activate the
internal reset switch and restore normal operation.
After a reset, check the real-time clock setting. It may
be necessary to reset the Clone Programmer clock from
a TV containing
the correct time.
*Note: The LT2002
programmer
is designed to be used with TVs
con-raining the 221-01006 and later processors.
Use with eaHier
TV sets may give unpredictable
results. Processors used be:fore the
221-01006-04
have a limited screen display capability.
They
cannot display entire screens as shown in the quick setup
instructions
accompanying
the LT2002
clone programme_
Use the
printed menu illustrations
on the quick setup sheet supplied with
the Clone as an aid to making your programming
choices.
(Although
the menus are not all displayed,
the clone :functions all
operate normally.)
Clone
Programmer
Troubleshooting
Clone
Programmer
Cloning Notes: While clone is copying or transferring
a master setup, do not touch or otherwise disturb clone or
connections
between clone and TV. Cloning a master TV setup should take at least 45 seconds. Transferring the
master TV setup to the target TV should take at least 45 seconds. Monitor LED on clone to assure that the
blinking heartbeat
pattern is present throughout
clone operations.
After cloning, be sure to disconnect
power from
the target TV for about
15 seconds.
-D
-D
m
z
x
®
Only use an appropriate
Installer
remote
to operate
clone
programmer
with 20LH1DC1.
÷
20LH1DC1
must be powered On for clone to work.
@ Install 4 fresh AA high-quality
alkaline batteries.
@
Connect
20LH1DC1
to a reliable
Analog
channel
signal source.
@
Set time on a TV, copy
time to Clone
Programmer.
68

Advertisement

Table of Contents
loading

Table of Contents