Dell 1100 Laser Mono Printer User Manual page 73

• The front or top cover is not closed.
• Paper is jammed.
• No paper is loaded.
• A toner cartridge is not installed or the
installed toner cartridge is not the
correct type.
The printer may be in Manual Feed mode
and out of paper.
The connection cable between the computer
and the printer is not connected properly.
The connection cable between the computer
and the printer is defective.
The port setting is incorrect.
The printer may be configured incorrectly.
The printer driver may be incorrectly
installed.
The printer is malfunctioning.
Paper does Paper has not been loaded correctly.
not feed
There is too much paper in the tray.
into the
printer.
The paper is too thick.
Printing is The job may be very complex.
extremely
slow.
If you are using Windows 98/Me, the
Spooling Setting may be set incorrectly.
Half the The page layout is too complex.
page is
blank.
The page orientation setting may be
incorrect.
The paper size and the paper size settings
do not match.
The paper There is too much paper in the paper tray.
keeps
• Close the corresponding cover.
• Clear the paper jam. See "Clearing Jams in the
Paper Tray" .
• Load paper. See "Loading Paper"
• Install a toner cartridge. See "Replacing the Toner
Cartridge" .
Add paper to the tray and press
operator panel to begin printing.
Disconnect the printer cable and reconnect it.
If possible, attach the cable to another computer that is
working properly and print a job. You can also try using
a different printer cable.
Check the Windows printer setting to make sure that
the print job is sent to the correct port. If the computer
has more than one port, make sure that the printer is
attached to the correct one.
Check the printer properties to ensure that all print
settings are correct.
Reinstall the printer driver; see "Installing Dell
Software" . Try printing a demo page.
Check the LEDs on the operator panel to determine if
the printer is indicating a system error.
Remove paper from the tray and reload it correctly.
Remove excess paper from the tray.
Use only paper that meets the specifications required
by the printer.
Reduce the complexity of the page or try adjusting the
print quality settings.
The maximum print speed of the printer is 14(A4) or
15(Letter) pages per minute.
From the Start menu, choose Settings and Printers .
Right-click Dell Laser Printer 1100 , choose
Properties , click the Details tab, and then choose the
Spool Settings button. Select the desired spool
setting.
Simplify the page layout and remove any unnecessary
graphics from the document.
Change the page orientation in your application.
Ensure that the paper size selected in the print settings
matches the paper in the tray.
Remove excess paper from the tray.
If printing on special materials, use the manual feed
on the printer's