Cleaning The Spark Arrester - Yamaha YSR45FX Owner's Manual

Cleaning the spark arrester
IF! ViVl,_! -'t_II _[e-I
Hot exhaust system may cause burns. To
avoid burns or fires, make sure that the en-
gine is stopped and the exhaust system is
cool before cleaning spark arrester. Do not
start the engine while cleaning the exhaust
system.
1. Remove the bolts.
1. Bolt(x3)
.
3.
Remove the tailpipe by pulling it out of
the muffler.
Tap the tailpipe lightly, and then use a
wire brush to remove any carbon depos-
its from the spark arrester portion of the
tailpipe and inside of the tailpipe housing.
1. Tailpipe 2. Spark arrester
4. Insert the tailpipe into the muffler and
align the bolt holes.
5. Install the tailpipe by installing the bolts,
and then tighten the bolts to the specified
torque.
8-31