Advertisement
Questions?
Use This Problem
Solver
PROBLEM
OVEN WILL
NOT WORK
OVEN LIGHT DOES
NOT WORK
FOOD DOES NOT
BROIL PROPERLY
FOOD DOES NOT ROAST
OR BAKE PROPERLY
SURFACE
UNITS
NOT
FUNCTIONING
PROPERLY
"F-" AND A NUMBER
FLASH
ON DISPLAY
POSSIBLE
CAUSE AND REMEDY
.Plug on range is not completely inserted in the electrical outlet.
.The circuit breaker in your house has been tripped,or a fuse has been blown.
• Oven controls not properly set.
• Light bulb is loose.
,Bulb is defective. Replace.
• Switch operating oven light is broken. Call for service.
,Oven controls not properly set, Check Broiling section of this book.
• Door not left at broil stop position as recommended.
• hnproper shelf position being used. Check Broiling Guide.
,Food is being cooked on hot pan.
• Cookware is not suitable for broiling.
• Aluminum foil used on the broil pan rack has not been fitted properly and
slit as recommended.
,Oven controls not properly set. Check Roasting or Baking section of this book.
• Shelf position is incorrect. Check Roasting or Baking Guides.
,Oven shelf is not level.
,Incorrect cookware or cookware of improper size is being used.
• A foil tent was not used when needed to slow down browning during roasting.
• Surface units are not plugged in solidly.
•Drip pans are not set securely in the cooktop.
* Surface unit controls are not properly set.
• If the time display flashes "F-" and a number, you have a function error code.
Press the CLEAR/OFF pad. Allow oven to cool for one hour. Place oven back
into operation. If the failure code repeats, disconnect all power to the range.
Call for service.
If you need more
help...call,
toll free:
GE Answer
Center"
800.626.2000
consumer
information
service
26
Advertisement
