Sanyo VPC-R1 Instruction Manual page 27

Turning the power on when the power save function is active
To save battery power, the power save function automatically turns off the
power after a period of no operation (about 1 minute in the shooting mode or
about 5 minutes in the playback mode).
To restore power when in the power save mode, perform one of
following steps.
œ Close and open the lens cover (only in the shooting
mode).
œ Press the shutter release button once.
œ Press the [MODE] button.
When in the playback mode, you can also...
œ Move the main switch to another position, then back
to [Ô].
NOTE
To protect your camera's lens...
œ Although pictures can be viewed with the lens cover open, closing the
cover is recommended to protect the lens.
œ When using the AC adaptor (sold separately), the power save function will
become active after about 30 minutes of inactivity.
Shutter
release
button
22
English