Sanyo VPC-R1 Instruction Manual page 69

HINT
If the date and time are not set...
œ June 1, 2001, 00:00 (midnight) becomes the set time, and during playback
the displayed time will show as "2001/06/01 00:00".
To correct the date and time setting
1
On the screen in step 4, press [l] on the arrow button to select the line
you wish to correct.
2
Press [c] to select the indication you wish to correct.
3
Press [j] or [l] on the arrow button to correct the indication.
4
Press the [SET] button.
Check the clock after changing the batteries.
œ When you replace the batteries, the internal clock setting is usually backed
up for up to 15 minutes. However, depending on how long the batteries
have been used, in some cases the date and time setting may be cleared.
For this reason, after changing the batteries and before taking pictures, it is
recommended that you check that the clock setting is correct (steps 1
through 4).
64
English