Pioneer DRM-7000 Operating Instructions Manual page 45

If a wiring monitor indicator on the back of the drive remains off, the cables may need to be
reseated. Disconnect the cables in the following order:
1 – SCSI Interface cable
2 – Changer Interface cable
3 – Power cable
Reverse the order to re-connect the drive thus beginning with the power cable.
7. Press the Enter button to move up one level to reveal all drive settings.
The following drive identification appears on the LCD display:
• SCSI ID
• Termination switch setting
• Device ID
For example, if four drives are daisy-chained and the last unit in the chain has termination
ON, the messages appear as follows:
B a y # 3 = D r i v e 3
DVDROM DVD-D7563
Press the Up arrow button
B a y # 4 = D r i v e 4
DVD-R DVD-R7322
Press the Up arrow button
B a y # 5 & # 6
n o c o m p o n e n t
B a y # 1 = D r i v e 1
DVDROM DVD-D7563
Press the Enter button
scsi ID = 1 TermOFF
dev – ID = 00071033
Press Enter then the Up arrow
B a y # 2 = D r i v e 2
DVDROM DVD-D7563
Press the Enter button
- 41 -
DRM-7000
Operating Instructions