Toshiba D-V610KU Owner's Manual page 112

GENERAL rlIIIF NG
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUT jack to your audio system,
etc.), you can set the HDMI audio output off.
Use [A / V] to select a setting, then press [ENTER].
• Set to "OFF" when the HDMI sound is not output.
Your setting will be activated.
You can adjust the RGBrange to make the dark areas of
the HDMI images brighter.
Use [A / V] to select a setting, then press [ENTER].
• Select "Enhanced" if the black-white contrast is not clear.
• This setting is effective only for HDMI RGBoutput.
Your setting will be activated.
E
©
_s
@
r;
@
@
£
©
2
_S
Q
@
EN 97
EgKGAUD D-VR610KU ENindd 97 ,s_+_,/h_ 2007/12/18 17:11:32