Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. DVD Recorder
  5. PRV-LX1
  6. Maintenance

Pioneer PRV-LX1 Maintenance

Hide thumbs Also See for PRV-LX1:
1
2
3
4
5

Advertisement

Quick Links

Download this manual See also: Training Manual
T
I
ECHNICAL
NFORMATION
PRV-LX1 – General Maintenance Practices
O
:
VERVIEW
The PRV-LX1 is a professional-level DVD recorder designed to provide many hours of video
recording and playback performance. While every operating environment is unique, there are some
general maintenance practices you can follow to keep your PRV-LX1 running at optimal performance.
This document offers some general guidelines and maintenance recommendations for the PRV-LX1.
•
Run a system check on the hard disk drive (HDD)
•
Clean the filters on the front of the unit
•
Check the Read/Write hours on the DVD drives
T
D
:
ECHNICAL
ETAILS
For details about the general maintenance practices noted above, refer to the following sections. If
you have questions or need additional assistance please contact your Pioneer representative.
WARNING
: Removing the PRV-LX1 cover automatically voids the warranty. Proceed
with the drive replacement only if your unit is already out of warranty or
you accept to knowingly voiding the warranty.
We strongly recommend that you send your PRV-LX1 to Pioneer Service for
any repairs or part replacement. Pioneer offers a free loaner PRV-LX1 while
your unit is being serviced.
HDD System Check
To maintain optimal performance, run a system check on the HDD about every three months. If the
recorder is used heavily, perform the HDD system check more frequently.
The HDD system check option is available under the System > HDD Tools menu. The process
locates and repairs minor HDD errors and logs errors that the recorder is unable to repair. All results
are displayed on your connected monitor.
To run a system check on the HDD, power on the PRV-LX1 and follow the directions below. Although
these instructions refer to the front panel, you may use the front panel, the remote control, or a USB
mouse to make selections from the PRV-LX1 menu.
1. Press the Function button on the front panel to access the Function Menu.
Pioneer Electronics (USA) Inc.
Home & Business Group of America
B
ULLETIN
(800) 872-4159
TIB # 190112
Released: Aug-2007
Page 1 of 5

Advertisement

loading

Related Manuals for Pioneer PRV-LX1

Summary of Contents for Pioneer PRV-LX1

  • Page 1 To run a system check on the HDD, power on the PRV-LX1 and follow the directions below. Although these instructions refer to the front panel, you may use the front panel, the remote control, or a USB mouse to make selections from the PRV-LX1 menu.

  • Page 2: Cleaning/Replacing Filters

    (800) 872-4159 for further assistance. Cleaning/Replacing Filters Visually inspect the PRV-LX1 filters for debris or blockage about every three months. The time period between inspections depends on the operating environment. Check the front filters more frequently if the recorder is installed in an area subject to large quantities of dust, oils, or poorly ventilated environments.
  • Page 3 1. Confirm that the PRV-LX1 is in Standby (indicator light is orange). If the PRV-LX1 is not in Standby, stop any current operation then press and hold the STANDBY/ON button for at least two seconds to place the recorder in Standby.
  • Page 4 9. Slide the filter cover back up into place. Confirm that the three hooks fasten securely with a “click” or until you feel light resistance. 10. Repeat this process for the other vent. Pioneer Electronics (USA) Inc. Released: Aug-2007 Home & Business Group of America...

  • Page 5: Additional Information

    TIB #190112 If a filter cover is uneven, dust and other debris can enter the PRV-LX1. Attempting to replace the cover when the filter is protruding from the air intake may damage the unit. Do not power on the PRV-LX1 until both the filter and cover are seated properly.