Pioneer PRO-510HD Service Manual page 22

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5
Adjustment Procedure of White Balnce
OFFSET Data Table
COLOR
STD NEWS LIVE FILM STD FILM MOVIE B&W STD B&W MOVIE NEWS LIVE FILM B&W
TEMP
Setting
I J
User MOVIE
Mode
E
TV
Input B
Signal
Adjustments are required for A, C, D, T, L, and V in the table above. Data in other parts are fixed. (I="0")
Proceed with the adjustments in the following order:
Adjustment
(1) STD OFFSET
(2) COMPONENT 15K
(3) COMPONENT 31, 33K
(4) RGB
(5) FILM for STD
(6) B&W for STD
• First, perform "(1) STD OFFSET", then perform adjustments (2), (3) and (4) so that the same picture
quality (color temperature) as achieved in (1) is obtained.
• In adjustment (5), make the whole picture more reddish than in (1), and in adjustment (6), make it more reddish.
• When readjusting, once "(1) STD OFFSET" is adjusted, the data for other input signals (component, etc.) revert to the factory-preset
values, in principle.
• After the adjustment of STD OFFSET is completed, check other picture quality modes by switching color temperatures and signals.
It is OK if picture quality does not deviate greatly when input signal is changed (composite, component 15K, etc.).
Furthermore, it is OK if color temperature changes when color remperarure is changed.
With this model, five color temperature switching modes are provided. In FILM and B&W modes, a white part appears to be reddish in
general because of their color temperature settings.
7
Color/Tint Adjustment
-3
Start
1st FAC
TV/ CBL VCR DVD
DTV /SAT /LD
TV
ON/OFF
POWER TV DTV
INPUT
1 2 3 4
SPLIT
SEARCH SELECT
SCREEN SUB CH
MODE ANT FREEZE
DTV
AUDIO DISPLAY
1 2 3 1
4 5 6
7 8 9
0 CH
ENTER
¢
CH
RETURN
CH VOL
MUTING 2
4
EDIT/ TV/SAT/DVD DTV/DVD TOP
LEARN MENU MENU
SOURCE DTV/SAT
5
POWER POWER GUIDE
2 SET/ 3
ENTER
DTV/(SAT)
8
∞ INFO
FAVORITE CH VCR REC
1 7 3 ¡
RECEIVER
POWER INPUT VOL VOL
Î
PROJECTION MONITOR RECEIVER
REMOTE CONTROL UNIT
214
Without RGB Input
K L M
GAME
F
COMPORNENT 15K COMPORNENT 31K 33K
C D
Direct key Picture quality data on the screen
DOWN A Adjustment of all standard picture qualities
SUB CH- A+C Adjustment of C
SUB CH+ A+D Adjustment of D
CH ENTER A+T Adjustment of T
INFO A+L Adjustment of L
DTV MENU A+V Adjustment of V
"Color Bar"
ADJUSTMENT OFFSET
TINT
V X
RGB
T
STD OFFSET
A
Adjust 1 COLOR and 2 TINT so that
the color-bar is set in the proper color
saturation and the tint.
Do not adjust the RGB, COLOR TEMP FILM and B&W.
RGB Input
Y Z
Make adjustment only for items
described as ADJ in the following
table.
Do NOT change other data.
Other data are adjusted in factory
shipment by Fix data of the following
table . (refer to page 215.)