Center Adjustment - Pioneer RM-V2400NA Technical Manual

ADJUSTMENTS
(3) Convergence Adjustment Contents
1 Measurement of screen center
The center can be found easily by pasting threads in the
spaces of the protection panels at the screen frame.
2 Adjustment signal input
For adjusting size...Frame size picture(EX.LD Test disc GGT1072, FRAME No. 5941),Monoscope, etc.
For screen joining, linearity, color adjustment...Use adjustment signals such as , cross-hatch, etc.
(EX. LD Test disc GGT1072, FRAME No. 7081,etc.)
If signals are created in the multi video processor, use them.
Input the above adjustment signals via the Multi Video Processor actually used.
Note : For the particulars about the FRAME No.,etc. of LD Test disc GGT1072,refer to the disc manual differently.

3 Center adjustment

Set to only green and adjust the center with V STATIC
GH STATIC .
&
The numbers correspond to the numbers in the flow-
chart.
V STATIC
GH STATIC
Center
71