To Set Internal Sync [Int Command]; To Set External Sync [Ext Command]; To Select Composite Video Input [Cib Command]; To Select Yc Separation Input [Yib Command] - Pioneer RM-V1000NU Technical Manual

APPENDIX (MVP manual)

To Set Internal Sync [INT command]

Input : INT
Explanation : • Forcibly sets internal sync.
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)

To Set External Sync [EXT command]

Input : EXT
Explanation : • Forcibly sets external sync.
However, if the GEN LOCK able signal is not input to the GEN LOCK IN (reference input) terminal,
external sync will not be set.
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)

To Select Composite Video Input [CIB command]

Input : CIB
Explanation : • Select the composite video input of NTSC input board.
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)

To Select YC Separation Input [YIB command]

Input : YIB
Explanation : • Selects the Y/C separation input of the NTSC input board.
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)
120