Pioneer RM-V1000NU Technical Manual page 79

ADJESTMENTS
[4] <GWB> (GET W/B DATA)-White balance adjustment data is output.
Format : Output in the following order.
1STX (02H)
2<LWT>/ LINEAR WHITE
3<CNT>/CONTRAST
4<BRT>/BRIGHTNESS
5<COL>/COLOR
6<TNT>/TINT
7<BLW>/BLUE LOW-LIGHT
8<GLW>/GREEN LOW-LIGHT
9<RLW>/RED LOW-LIGHT
0<BHI>/BLUE HIGH-LIGHT
-<GHI>/GREEN HIGH-LIGHT
=<RHI>/RED HIGH-LIGHT
~<SHP>/SHARPNESS
!<ABL>/ABL LEVEL
@<ABG>/ABL GAIN
#ETX (03H)
(Note 1) Dummy when INPUT=RGB
(Note 2) No dependent on mode. (Has one data.)
(Note 3) Dummy when PAL signal is input. (INPUT=VIDEO or Y/C)
(Note 4) Dummy when COMBINATION=OFF (Data is output when COMBINATION=ON)
(Note 5) SHARPNESS data for OFF is output when MULTI=OFF, and SHARPNESS data for ON is output when
MULTI=ON.
[5] <GUS> (GET CONV. USER DATA)=Deflection and convergence data memory area setting state is output.
1STX (02H)
2Memory area selected when INPUT=VIDEO or Y/C & input signal=NTSC.
Example)US 1:Indicates CONV.MEMO-1 is selected.
3Memory area selected when INPUT=VIDEO or Y/C & input signal=PAL
(Or other than NTSC, containing no signals).
Example)US 2:Indicates CONV.MEMO-2 is selected.
4Memory area selected when INPUT=RGB & input signal=NTSC.
Example)US 1:Indicates CONV.MEMO-1 is selected.
5Memory area selected when INPUT=RGB & input signal=PAL (or other than NTSC, containing no
signals).
Example)US 2:Indicates CONV.MEMO-2 is selected.
6ETX (03H)
78
adjustment data (3 BYTE)
adjustment data (3 BYTE)
adjustment data (3 BYTE)
adjustment data (3 BYTE) (Note 1)
(3 BYTE) (Note 1) and (Note 3)
adjustment data
adjustment data (3 BYTE)
adjustment data (3 BYTE)
adjustment data (3 BYTE)
adjustment data (3 BYTE)
adjustment data (3 BYTE)
adjustment data (3 BYTE)
(3 BYTE) (Note 1) and (Note 5)
adjustment data
adjustment data (3 BYTE) (Note 4)
adjustment data (3 BYTE) (Note 2)
(3 BYTE)
(3 BYTE)
(3 BYTE)
(3 BYTE)