Using The External Navigation Unit - Kenwood DDX4028BT Instruction Manual

Using the external navigation unit

You can connect a navigation unit ( KNA-G620T, KNA-G630 : optional accessory) to the
navigation input terminal so that you can view the navigation screen. (☞ INSTALLATION
MANUAL)
The navigation guidance comes out through the front speakers even when you listen to an
audio source.
To view the navigation
screen
On <Top Menu>:
On any screen:
The navigation screen is activated.
• While the navigation screen is displayed,
the touch panel operations are available
only for using navigation function.
• The aspect ratio of the navigation screen
is fixed to < FULL> regardless of the
<Aspect> setting (☞ page 36).
To cancel the navigation screen
Settings for navigation unit
1
On <Top Menu>:
30
DDX4028BT/DDX4058BT/DDX3028/DDX3058
or
2
3
Guidance Select front speakers
used for the navigation
guidance.
Volume Adjust the volume of the
navigation guidance. (0
to 35)
NAV Mute Select <ON> to
attenuate the sound
coming through
speakers other than the
front speakers during
navigation guidance.
NAV Setup Press [Enter] to display
the setup screen for
the navigation unit.
See the instruction
manual supplied for the
navigation unit.