Recording From The Fm Radio - Sharp WA-MP50H Operation Manual

To interrupt recording:
" When the external equipment is stopped, the data
number increases by one and the unit will enter the
synchronised recording pause mode. When playback
is resumed, recording will also resume.
" If a silence lasts for 3 seconds or more, the data num-
ber increases by one and recording will be paused.
When the unit receives sound again, recording auto-
matically starts.
" A new data is created when recording resumes.
To stop recording:
Press the button.
To cancel synchronised recording:
After steps 3 - 6 on page 35, select "Off" in step 7.
Note:
Data recorded with the unit are named automatically as
follows.
FM radio recordings: F001.mp3, F002.mp3...F999.mp3
Line-in recordings: L001.mp3, L002.mp3...L999.mp3
Microphone recordings: M001.mp3, M002.mp3...M999.mp3
(Maximum number: 999)
Newly saved files are numbered sequentially following
the largest number among the existing file names. It is
recommended to delete or move files from one with the
largest number. To transfer data to a PC, see "To use as a
USB storage device" on page 43.
WA-MP50_55H TINSZA051SJZZ

Recording from the FM radio

Check the memory status beforehand (see page 42). If
the memory is low, move some data to a PC to make
some room.
MIC
1
Tune in to the desired station. (Perform steps 1 -
5 in "Tuning" on page 29.)
2
Press the button to start recording.
Remaining recording time
If the memory is low, "Disk Is Full! Can Not Record"
appears (recording is not possible).
To interrupt recording:
Press the button.
To resume recording, press the button again.
To stop recording:
Press the menu button.
Data will be saved.
05/5/23 WA-MP50_55H_SEEG_E.fm
WA-MP50H
WA-MP55H
ENGLISH
00:00:01
01:23:45
File name2
Recording...
E-36
D 1
F 2
S 3
V 4
I 5
N 6
P 7
E 8