Cd Or Mp3/Wma Disc Playback; Advanced Cd Or Mp3/Wma Disc Playback - Sharp DK-A10H Operation Manual

DK-A10H Advanced CD or MP3/WMA disc playback (continued)
DK-A10H(BK)
Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press
the MEMORY button to enter the
programming save mode.
2
Press the
select the desired track.
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5
Press the button.
The total number in memory will
appear.
6
Press the /
20
or button to
Selected track number
button to start playback.
To clear the programmed selections:
Press the CLEAR button on the remote
control whilst the "MEM" indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEM" indicator is lit, press the
CLEAR button on the remote control. The "MEM" indicator will
disappear and all the programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEM" indicator will
be displayed. Then follow steps 1 - 6 to add tracks. The new tracks
will be stored after the last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or button.
Notes:
When a disc with programmed tracks is ejected, the programme
is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the programme operation, random play is not possible.