Table of Contents
Advertisement
Problem
No image from
• Make sure the channel of the connected TV is
the Player
appears on the
• Make sure video and audio cables are
screen of a
connected
device.
The volume of
• Change the "COMPRESSION" setting to "ON".
Dolby Digital
audio from a
DVD is too low.
The battery
• Make sure the Player is turned off. The battery
pack does not
charge.
• A warm battery takes longer than normal to
Power does
• Replace the battery pack with a charged one or
not turn on.
Indicator lamp
• Charging of a battery pack may become disabled
does not light
(battery pack
does not
charge).
• Make sure the temperature of the battery pack
• Check to make sure that the AC adapter DC
Recommended Action
set to VIDEO or AV.
connected correctly.
This setting compensates for the relatively low
average volume level of Dolby Digital, which is
used to provide the widest possible dynamic
range.
pack does not charge when it is installed in the
Player while Player power is turned on.
charge. Wait until the battery cools to normal
temperature before trying to charge it.
switch to AC adapter power.
(and the Indicator lamp may fail to light)
whenever heat from the Player causes the
internal temperature of an installed battery pack
to rise above certain level. When this happens,
remove the battery pack from the Player.
Charging will start automatically when battery
pack internal temperature drops to a safe level.
is within the allowable temperature range of
10°C to 30°C for charging.
cord is connected correctly.
Troubleshooting
Page
23
48
28-30
97, 98
27-31
–
98
27
101
GB
Advertisement
Table of Contents
