Virtual Dolby (Qsurround) Setting - Sharp DV-L88S Operation Manual

Using the Function Control
DVD
DVD

VIRTUAL DOLBY (QSURROUND) setting

This function allows you to enjoy a "surround sound" effect when you are using
an analogue connection (using AUDIO OUT on the Player) to 2-channel audio
equipment (TV, etc.).
Preparation:
To use the VIRTUAL DOLBY (QSURROUND) function
• Set the "COMPRESSION" setting in "AUDIO SETUP" to "OFF" (see page 48).
Refer to the table below about the types of audio format with which VIRTUAL
DOLBY (QSURROUND) works.
Types of audio recorded on the disc
Dolby
Digital Pro Logic
Use the following procedure to change the setting between "ON" and "OFF",
and the level for the VIRTUAL DOLBY setting.
1
Press FUNCTION during playback.
• The Function control screen appears.
2
Use ' or " to select
ENTER.
78
GB
Dolby Digital
Dolby
2ch/Linear
PCM
✕
and then press
MPEG Audio
Ver. 2.0/
DTS
✕
ON
DVD