Virtual Dolby (Qsurround) Setting - Sharp DV-L80 Operation Manual

Using the Function Control
DVD DVD-RW
DVD DVD-RW

VIRTUAL DOLBY (QSURROUND) setting

This function allows you to enjoy a "surround sound" effect when you are using
an analogue connection (using AUDIO OUT on the Player) to 2-channel audio
equipment (TV, etc.).
Preparation:
To use the VIRTUAL DOLBY (QSURROUND) function
• Set the "COMPRESSION" setting in "AUDIO SETUP" to "OFF" (see page 47)
and set the "SPEAKER" setting in "SPEAKER SETUP" to "2ch" (see page 56).
Refer to the table below about the types of audio format with which VIRTUAL
DOLBY (QSURROUND) works.
Types of audio recorded
on the disc
"SPEAKER" settings
in "SPEAKER SETUP"
The speaker mode is set to
"2ch".
Use the following procedure to change the setting between "ON" and "OFF",
and the level for the VIRTUAL DOLBY setting.
1
Press FUNCTION during playback.
• The Function control screen appears.
2
Use ' or " to select
ENTER.
GB
Dolby Dolby
Digital Pro Logic
and then press
Dolby Digital DTS/MPEG
2ch/Linear Audio
PCM Ver. 2.0
✕ ✕
ON
DVD