Audio Setup Setting - Sharp DV-L80 Operation Manual

AUDIO SETUP setting

COMPRESSION .......... Use this setting for increasing the average volume of
DIGITAL/MPEG .... Use these settings for specifying the type of digital
PRO LOGIC ................ Use this setting for playing discs recorded using Dolby
Setting the COMPRESSION (Dolby Digital output level)
When Dolby Digital is used to record the audio on a DVD, the average overall
volume level of the audio is relatively lower than that produced by a VIDEO CD/
Audio CD. This is to provide the widest possible dynamic range. To counteract
this, your Player automatically raises the overall average volume level of a disc
recorded using Dolby Digital to a level that is similar to that of a VIDEO CD/
Audio CD.
DVD
Dolby Digital audio
VIDEO CDs
Audio CDs
• OFF ....... Audio level recorded on disc is played back without modification.
• ON ........ Dolby Digital average audio level is increased so it sounds similar
to that of a VIDEO CD/Audio CD.
Dolby Digital audio when playing a DVD.
output when playing a disc recorded using Dolby
Digital/MPEG Audio.
Pro Logic via an analogue connection.
COMPRESSION:
OFF
• Low audio level
Setup
COMPRESSION:
ON
• Audio level the same
as Audio CD, etc.
GB