Table of Contents
Advertisement
Setup
Setting the MPEG
• At first, set the "SPEAKER" setting in "SPEAKER SETUP" to "2ch". (See
page 56.)
1
While a disc is stopped, press SETUP to display the Setup screen.
2
Use ' or " to select the "
3
Press ENTER and then use ' or " to select "MPEG".
4
Press ENTER to display the settings you
can select.
5
Use ' or " to select "BITSTREAM" or "PCM".
BITSTREAM: Use this setting for a digital connection of a receiver
PCM:
6
Press ENTER to confirm the setting.
• To exit the Setup screen and return to the Startup screen, press SETUP
or RETURN.
• When playing a disc recorded using DTS, the bitstream type signal is output
regardless of the setting of "
GB
AUDIO SETUP".
(amplifier) equipped with an MPEG Audio decoder.
Use this setting for a digital connection to the PCM digital
input jack of a DAT or MD, or for a digital connection to a
receiver (amplifier) that does not have an MPEG Audio
decoder.
DIGITAL" and "MPEG".
AUDIO SETUP
COMPRESSION:
DIGITAL:
BITSTREAM
MPEG:
BITSTREAM
BITSTREAM
ON
PCM
Advertisement
Table of Contents
