Table of Contents
Advertisement
Setting the DIGITAL OUT
When playing a disc recorded using Dolby Digital (5.1ch)/MPEG Audio (5.1ch),
you can specify either "BITSTREAM" or "D-PCM"/"PCM" as the digital type
output.
Setting the DOLBY DIGITAL
• At first, set the "SPEAKER" setting in "SPEAKER SETUP" to "2ch". (See page
56.)
1
While a disc is stopped, press SETUP to display the Setup screen.
2
Use ' or " to select the "
3
Press ENTER and then use ' or " to select "
4
Press ENTER to display the settings you
can select.
5
Use ' or " to select "BITSTREAM" or "D-PCM".
BITSTREAM:
D-PCM:
(Down Mix PCM) PCM digital input jack of a DAT or MD, or for a digital
6
Press ENTER to confirm the setting.
• To exit the Setup screen and return to the Startup screen, press SETUP
or RETURN.
AUDIO SETUP".
Use this setting for a digital connection of a
receiver (amplifier) equipped with a Dolby Digital
decoder.
Use this setting for a digital connection to the
connection to a receiver (amplifier) that does not have a
Dolby Digital decoder.
DIGITAL".
AUDIO SETUP
COMPRESSION:
DIGITAL:
BITSTREAM
MPEG:
BITSTREAM
Setup
ON
D-PCM
GB
Advertisement
Table of Contents
