Command Code Table; Rs-232C [Direct Operation Specification] Operation Setting Command Form - Mitsubishi Electric DX-TL5000E series Operation Manual

Command code table

Detail of the numbers:
: When "Delimiter" in the <RS-232C Setting> is set to "CR," carriage return code (0DH) is input. When "Delimiter" is
#1
set to "CR•LF," carriage return code (0DH) and line feed code (0AH) are input.
#2 : When "Delimiter" in the <RS-232C Setting> is set to "CR," carriage return code (0DH) is output. When "Delimiter"
is set to "CR•LF," carriage return code (0DH) and line feed code (0AH) are output.
: Indicates one number or character.
*

RS-232C [Direct operation specification] operation setting command form (1/7)

Command name Command
Power
Record
Playback
Acquire information
of recording start/
end point
Status
5
Note