Menu Settings; Menu Chart - Mitsubishi Electric HS-MD3000E Installation And Operation Manual

Menu Settings

Menu Chart

Press the MENU button
<MENU 1>
REC TAPE END STOP
TAPE END STOP
TAPE IN STOP
TAPE LENGTH E-180
VISS REC
TIME CODE REC OFF
TIME DATE DISP. OFF
FOOT SWITCH L.E
DIMMER OFF
VCR operations can be set through menus. Set MENU1 and MENU2 by the following steps.
1. Press MENU button.
• Each time you press the button, the display will be switched in the order of <MENU 1>
<MENU 2> <MENU 3>
Note
• Press MENU button for about 2 seconds to display the menu.
2. Turn JOG to the left or right to select the desired item.
• When turned to the right, the cursor moves downward.
• When turned to the left, the cursor moves upward.
3. Press ENTER button, then the setting item flashes.
4. Turn JOG to the left or right to change the setting.
5. Press ENTER button to set.
6. Press MENU button several times to exit the menu.
Use of JOG dial for menu setting
Info.
• Put a finger to the dimple and turn round and round.
• Turning to the right changes the setting item to forward direction and turning to the left changes
the setting item to backward direction.
• When the setting item is not flashing, turn to the right to move the cursor (
turn to the left to move it upwards.
14
Installation
<MENU 2>
S-VHS AUTO
Y-NR ON
C-NR ON
Y-ENHANCER ON
TBC ON
COLOUR FILTER OFF
FREEZE MODE FRAME
Hi-Fi AUDIO ON
NORMAL AUDIO IN MIX
<ELAPSED TIME>
<MENU 3>
DAYLIGHT SAVINGS AUTO
MONTH
DAY
YEAR 2002
TIME 00:00:00
DAYLIGHT SET
WEEK MONTH TIME
ON LST SUN 03 01:00
OFF LST SUN 10 02:00
exit the menu <MENU 1>...
) downwards and
Note A point to notice
<ELAPSED TIME>
HEADS
POWER
01
01
MENU button
ENTER button
Supplementary information
Info.
0H
0H
JOG dial