Miele H 115 MB Operating Instructions Manual page 24

After the appliance has been con-
nected to the power supply or after a
power cut "12:00" will appear in the dis-
play. The colon will flash.
If the time of day is not then entered im-
mediately, the time will start to run from
"12:00" onwards.
To enter or alter the time of day the
function selector switch must be set
to position "0".
Press the touch control twice.
The facia text / symbol for "time of day"
lights up.
The colon is lit and not flashing.
Use the – /+ touch control to enter or
alter the time of day.
There are 4 seconds to do this. When
the colon starts flashing again the new
time is accepted, (ENTER or START
can also be pressed to confirm the
entry). If no new time is entered within
4 seconds while the colon is lit, but not
flashing, the clock reverts to the pre-
vious time.
24
Press the touch control again
within 4 seconds of entering or alter-
ing the time of day.The display area
will remain dark.
Press the touch control twice.
The time of day display will appear.
First of all, the colon will be illuminated
constantly (i.e. not flashing). This
means that the time of day can be al-
tered. The colon will begin to flash
when the system has accepted the
new time of day.