^ To take out the roof liner, first loosen
the two fixing screws holding up the
roof liner and the grill element. Lower
the grill heating element and the roof
liner at the front.
^ You can now pull the roof liner out. In-
sert the new roof liner and tighten the
screws back up.
^ Remove the roasting filter if present
(see "Roasting filter").
^ Remove the side shelf runners.
^ Use a suitable screwdriver to loosen
the screws in the back panel and re-
move the panel.
^ Insert a new panel and screw in
firmly. Re-fit the side shelf runners
and if required, the roasting filter.
Do not operate the oven without the
catalytic back panel fitted. This
could cause considerable injury.
^ First remove the side runners as de-
scribe in "To remove the side run-
ners".
^ Unscrew the fixing with a coin and
pull the panel out.
^ Insert the new side panel, screw in
firmly and follow the above proce-
dure in reverse.
57