Table of Contents
Advertisement
^ The stainless steel hose should be
attached to the solenoid valve at the
base of the appliance at the back.
^ Ensure that the hose is fitted correctly
and that it is water tight.
If the stopcock for the water supply is
located on the left-hand side of the
appliance, the stainless steel hose must
be positioned as shown in the following
illustration:
Mains water connection
^ Turn on the stopcock slowly and
check the whole water system for
leaks.
^ The appliance can then be
connected to the electricity supply.
^ Push the appliance into its final
position.
When doing so, make sure that the
stainless steel hose is not kinked or
damaged.
After a maximum of 24 hours the first
ice cubes will drop out of the ice
cube maker and collect in the
drawer.
47
Hide quick links:
Advertisement
Table of Contents
