Removing The Cpu - NEC Versa S940 Disassembly Manual

Removing the CPU

To remove the CPU first remove the battery (see
following steps:
1. Losses four screws that retaining the CPU cover as shown in Fig. 10
2. Remove the CPU Fan screws, disconnect the CPU Fan connector and unscrew screws on
CPU Heat Sink in descending order (3 2 1) as shown in Fig. 11
Note: When install CPU heat sink, screws must be secured in ascending order (1 2 3).
Fig. 10 Removing the screws retaining CPU cover
Fig. 11 CPU Heat Sink
NEC Versa S940/PB EasyNote A7 Disassembly Manual
Removing the Battery) then perform the
A = M2.5x5 Black
Page 11