Removing The Memory Module - NEC Versa S940 Disassembly Manual

Removing the Memory Module

To remove the Memory Module, first remove the battery (see
perform the following steps:
1. Release the three screws retaining the memory module cover.
Fig. 2 Removing the screws retaining the memory module slot cover
2. Unclip the memory module as shown in Fig. 3
3. Remove the memory module from its slot and put it aside.
Fig. 3 Removing the memory module
NEC Versa S940/PB EasyNote A7 Disassembly Manual
Removing the Battery), then
Page 6