Advertisement
Table 4
System Feature Capacities (continued)
Ring Tones (External Call Ring Tones for IP telephones)
Ring Tones (Internal Call Ring Tones for IP telephones)
Speed Dial - Station SD numbers per system
Speed Dial - System SD numbers per system
Tenants
Destination Restriction Level (DRL) Classes
Verified Account Codes
Voice Mail SMDI Interface
SIP URI per system
SIP Trunk service Index
LCR Exception Table Size
MAX digit number for LCR Route Plans
MAX Number of LCR Route Plans
CSTA Device Monitors
CSTA Call Monitors
1
SMDI and SMDR require a LAN interface.
2
Conference channels are used dynamically, so the maximum number of simultaneous conferences is affected by
the number of conference members in each conference. The total number of members in simultaneous
conferences cannot exceed the total number of conference channels. Each conference can have up to eight
members. Two CO line connections do not require a conference channel.
Third party SIP endpoints cannot be the originator of a conference call.
3
Each DNIS/DID Number uses up to three Routing Destination Numbers (Day1, Day2 and Night) in any combi-
nation of (1~6) and (7~32) digit numbers.
4
This is not the number of simultaneous OCA but the terminal number of OCA available. (Simultaneous number is
limited by maximum capacity of line and call).
5
Up to 100 Station SD numbers, allocated in increments of 10, can be programmed per station.
Introducing Toshiba's IPedge EP Server
Features
5
1
EP Server
EC Server
10
10
10
10
8,400
8,400
800
800
8
8
16
16
4,000
4,000
1
1
1,000
1,000
128
128
2,500
2,500
19
19
128
128
56
1,152
56
560
Capacities
EM Server
10
10
8,400
800
8
16
4,000
1
1,000
128
2,500
19
128
1,152
560
15 of 19
Advertisement
